| Substitute |
Trading mark |
Substituted compound |
Conclusion on application |
Specific conditions or limitations |
Notes |
| Water cleaners |
|
CFC-113, Methyl chloroform |
Applicable |
no |
EPA plans to issue instructions on discharge of wastes in this industry. |
| Semiaquatic reagents |
|
CFC-113, Methyl chloroform |
Applicable |
no |
EPA plans to issue instructions on discharge of wastes in this industry. |
| Pure organic solvents (terpenes, С5-С20 saturated hydrocarbons of oil, oxygen-containing solvents, such as cetones, simple and compound ethers, spirits, etc.)
|
|
CFC-113, Methyl chloroform |
Applicable |
no |
If possible, OSHA standards should be complied with. |
| Trichloroethylene, perchloroethylene, methylene chloride |
|
CFC-113, Methyl chloroform |
Applicable |
no |
If possible, OSHA and RCRA standards should be complied with. |
| Super-critical fluids |
|
CFC-113, Methyl chloroform |
Applicable |
no |
no |
| Volatile methyl siloxanes |
|
CFC-113, Methyl chloroform |
Applicable |
no |
Are suitable for the whole class of compounds. |
| Trans-1,2-dichloroethylene |
|
CFC-113, Methyl chloroform |
Applicable |
no |
The limit of concentration is 200 ppm. |
| Simple ether (HFE): C4F9OCH3 (methoxynonaphthorbut, iso- and normal structure) |
|
CFC-113, Methyl chloroform ,
HCFC-141b |
Applicable |
no |
Are suitable for the whole class of compounds. |
| HFC-4310mee |
|
CFC-113, Methyl chloroform, HCFC-141b |
Applicable with certain limitations |
Average concentration of the working zone should not exceed 200 ppm, maximum - 400 ppm. |
no |
| Monochlorotoluenes and benzotrifluorides |
|
CFC-113, Methyl chloroform |
Applicable with certain limitations |
Average concentration of the working zone should not exceed 200 ppm, maximum - 400 ppm. |
Ultimate concentration based on the standard OSHA PEL is 50 ppm for orthochlorotoluene. |
| Dibrommethane |
|
CFC-113, Methyl chloroform |
Not applicable |
no |
High ODP: there are other alternatives |
| HCFC-141 and its blends |
|
CFC-113, Methyl chloroform |
Not applicable |
no |
High ODP: there are other alternatives |
| Chlorobrommethane |
MackFri®-141b and different blends |
CFC-113, Methyl chloroform, HCFC-141b |
Not applicable |
no |
High ODP: there are other alternatives |
| HFE-7200 (C5F9OCH3) |
|
CFC-113, Methyl chloroform |
Applicable |
no |
|
| Easily absorbed oils |
|
CFC-113, Methyl chloroform |
Applicable |
no |
Depends on the geographical region, can be the object of VOC control. |
